The maintenance of metal band saw machine

0 Comments

We have different types of metal band saw machines. The maintenance of the band saw is different because of their parts. So, the maintenance of the double-column metal band sawing machine is particularly important. We should pay attention to the following maintenance matters of the automatic double-column metal band saw.

  1. Arrange the iron cuts in the working table and saw frame in time to prevent blocking the saw teeth.
  2. Always check the purity and capacity of hydraulic oil and coolant, and filter or increase it in time to ensure sufficient oil and liquid supply to prevent the gambling of hydraulic parts and faucets from affecting the normal operation of the sawing machine.
  3. Oil should be added to the guideway surface and each smooth point every shift. The bearing of the saw wheel and the large gear in the driving wheel should be added once a week. The smooth oil in the gearbox should be replaced once a year.
  4. Keep the rolling guide surface clean under the saw frame rotating body

Any band sawing machine must be regularly maintained and repaired during use, which not only extends the service life of the sawing machine but also reduces the occurrence of problems with the sawing machine to a certain extent. The automatic band sawing machine has the function of a fully automatic operation cycle from feeding to products. It is used for cutting and cutting materials in bearings, gears, motors, castings, cars, and machinery manufacturing. It is the ideal equipment for mass production by large and medium-sized professional enterprises.

 

How to operate a sawing machine with high power?

 

The sawing machine is suitable for processing factories, tool factories, mold factories to saw carbon steel, stainless steel, copper, aluminum and other non-metallic materials, and can be sawed at any point of view. Simple operation, high cost performance, low power loss, small saw seam, saving materials, and high economic benefits.

 

  1. Install a grating ruler on the original general sawing machine for azimuth measurement, and the original hydraulic system remains unchanged.
  2. In order to satisfy the requirement of not changing the original hydraulic system at the same time, the system adds an orientation control module based on the general solenoid valve. According to the difference in sawing material and saw blade function, it is best to automatically adjust the saw blade speed and sawing speed in real time. For example, when the saw blade bending reaches a certain threshold value of the system, the system will lower the speed adaptively or close the feed. This requires major changes on the basis of the original general band saw, such as changing the original hydraulic unit and adding a saw blade bending monitor.
  3. Control system software safety function design, including silo, storage management retrieval, saw parts classification management, saw blade bending monitoring, material compression, saw blade speed, sawing feed speed adaptive control, etc.

Categories:

Leave a Reply