The Introduction Of Hydraulic Shearing Machine QC12Y Series

0 Comments

The whole structure of Shearing machine

■ Totally European design,streamlined looking.

■ Remove rust with sand-blast and coated with anti-rust paint

■ Frames, assembly surfaces and connection holes are machined after the welding process,up to 60′ in a single pass.

1.Hydraulic system of shearing machine

■ Adopt integrated hydraulic control system, more reliable and easy for maintenance.Hydraulic system is from Bosch -Rexroth,Germany.

■ All pipes, flange and joint with vibrations proof and leakage proof design and setting .

■ All seals in cylinder is NOK from Japan,the most famous brand,good quality and high performance.

■ Overload overflow protection is outfitted to hydraulic system,which can assure no leakage,and the oil level can be read or seen directly.

■ The hydraulic system is made in compliance with current regulations.

 

2.Electrical system

■ Electrical Cabinet under the standard of IP55, Electrical under international CE Standard, safe and reliable, strong anti interference capability.

■ Protective fence and the safety interlock to ensure the operation safety. Have a movable single-hand pedal switch,easy to operate.

■ Front Side Covers with safety switches, Back light safety guards,Foot pedal conforming to CE regulation.

  1. Blade Adjust and Cutting Precision:

■ Shearing angle is Variable, which can reduce the shearing deformation of sheet metal and can shear much thicker sheet metal.

■ Adopt handwheel to rapidly and accurately adjust the blade clearance, Shearing in sections, shadow-line cutting.

■ The rectangular monoblock blades featuring long life with 4 cutting edges, quality high-carbon high-chrome blades D2 quality.Material: 9CrSi

4.Backgauge

■Back gauge instal on the blade rest, along with the rest on the up and down movement, it’s driven by a motor through the E21s system can control the plate before and after the position adjustment, behind.

■ The adjusting range of the backstop material is 10 ~ 500mm, which can be adjusted freely in this range.

5.E21s NC Controller

  • Backgauge and block control
  • Control for AC motors,frequency inverter
  • Intelligent positioning
  • Stock counter
  • Holding/decompression time setting
  • Program memory of up to 40 programs,up to 25 steps per program
  • One side positioning
  • Retract function
  • One key backup/restore of parameters
  • mm/inch
  • Chinese/English

 

6.Shearing machine equipment

 

Categories:

Leave a Reply