WMTCNC Hydraulic Press Brake Machine WC67Y-63X2500 consists of a support stand, working table, synchronous mechanism, and sheet metal stop system. It is a kind of conventional hydraulic press brake machine. It is able to bend sheet metal with Max. length 2500mm, another special size is available according to actual needs.
Welded steel plate of the whole machine to ensure rigidity of press brakes, vibration is adopted to remove inner stress. We have good equipment to machine parts of hydraulic press brake to make sure good accuracy of components, to realize good precision of bending works.
|Specification||Nominal Pressure||Length of working table||Throat dephts||Ram Stock||Number of stroke||Motor Power|
- Adopt an integrated hydraulic control system, more reliable and easy for maintenance. Hydraulic system is from Rexroth, Germany.
- All pipes, flange and joint with vibrations proof and leakage proof design and setting.
- All seals in the cylinder are Volqua from Japan, the most famous brand, good quality, and high performance.
- Overload overflow protection is outfitted to the hydraulic system, which can assure no leakage, and the oil level can be read or seen directly.
- The hydraulic system is made in compliance with current regulations.
- Electrical Cabinet under the standard of IP65, Electrical under international CE Standard, safe and reliable, strong anti-interference capability.
- Protective fence and the safety interlock to ensure operation safety. Have a movable single-hand pedal switch, easy to operate.
- Front Side Covers with safety switches, Back light safety guards, Foot pedal conforming to CE regulation.
3.E21 NC Controller
- Backgauge and block control
- Control for AC motors, frequency inverter
- Intelligent positioning
- Stock counter