WMT CNC Industrial Co., Ltd | All Rights Reserved.
When customers buy the rolling bending machine, they don’t know how to solve the problem of the plate rolling machines process? Now I’ll talk about the rolling process of rolling bending machine?
In the use of the bending machine, the role of each process needs to be clear. Especially for some important processes, the process system needs to be adjusted. Of course, in the process of adjustment, it should be clear about the relevant matters needing attention. Of course, different parts, corresponding adjustment methods and specific adjustment skills will naturally have certain differences. In particular, the adjustment error mainly comes from the influence on the machining accuracy, which will appear different situations according to different way.
For the CNC forging industry, it is necessary to formulate strict technical operation procedures, which can not only effectively improve the production efficiency, but also avoid the safety production accidents caused by improper operation, and improve the orderly operation regulations can effectively extend the service life of the machine.
For the CNC forging industry, it is very necessary to formulate strict technical operation procedures. It can not only effectively improve the production efficiency, but also avoid the safety production accidents caused by improper operation, and improve the orderly operation regulations can effectively extend the service life of the machine Slitting machine and plate bending machine are all machines with strict requirements for operation procedures. There are detailed and strict operation specifications before starting, during operation or after work in the afternoon. Today, we will mainly explain the seven procedures of hydraulic plate bending machine in operation.
Step 1: The machine should be operated in air for several cycles. If there is no abnormal situation, try to cut different thickness plates (from thin to thick).
Step 2: Open the pressure gauge switch when the machine is testing and shearing. The purpose is to observe whether the pressure value of the oil circuit is normal. If it is abnormal, the specified requirements can be achieved by adjusting the overflow valve.
Step 3: adjust the gap between the blades, which needs to be determined by the thickness of the plate.
Step 4: the material to be rolled is transported to the workbench through the feed system to check whether the inlet is normal.
Step 5: according to the customer requirements of cutting plate size for parameter setting, adjust the position of the rear baffle.
Step 6: the steel plate is pushed by hand to make the plate edge contact with the baffle plate, so that the shear size can be easily determined.
Step 7: press the foot switch to cut the steel plate to complete the work.
The above seven steps are the basic operation procedures of hydraulic plate rolling machine during operation, hoping to help you.